TUB SPOUT HEIGHT INSTALL

Similarly, a miscalculated height can result in backflow causing tub water to get inside the faucet and contaminate the water source. If the faucet is not placed at a safe distance from the tub, it can result in splashing and damaging the walls. The bathtub faucet needs to be at a certain height to avoid splashing and backflow. Why does the bathtub faucet need to be at a certain height? If the distance between the diverter and the valve is not maintained, it can cause leakage from the showerhead or the spout. The distance between the spout and valve is very important to maintain.įor a combination tub and shower, the spout comes with a diverter that enables water to come from the faucet and showerhead alternatively. You should always check the manufacturer’s instructions. Still, it can change depending on the type of faucets and other fittings. This is an ideal measurement that works for most tub plumbing fittings. Usually, the shower valve is placed 26-28 inches off the floor. This way, the distance between the floor and the spout will be 18-20 inches. It is recommended to place the spout 4 inches above the rim of the tub. The tub spout should be 6-11 inches away from the shower valve. How far should the tub spout be from the valve? This way, the spout can reach the inside of the tub easily and you can get the most comfortable bathing experience.

TUB SPOUT HEIGHT INSTALL

If you are using a slipper tub where there’s one lower end and one higher end, install the spout on the lower end of the tub.įor a slipper tub with a lower-middle part, install the spout in the middle. It should not be above 4 to 6 inches above the rims.Īlso, make sure that the faucet controls can be reached easily. If you fail to measure it, you may end up splashing water all over the place. The main rule that you should follow is ensuring that the spout points directly inside the tub and that it reaches the tub properly. But the spout placement needs to be perfect to ensure comfort to the bather. How high should tub spout be above freestanding?įreestanding tubs are fun to use. Tub faucets are affordable and less complicated to install compared to wall-mounted ones. You need to choose the right one considering the type of your tub, spout dimensions, and most importantly, your and your family’s needs.

There are different types of tub faucets available in the market. Either way, the height depends on the convenience and comfort of the bather. If your bathtub is placed against the wall or has one or more walls around it, you should go for a concealed tub faucet.įor an independent bathtub, the faucet can be a floor-type tub faucet. Tub faucet:Ī tub faucet is usually placed on one side of the bathtub. On the higher side, the distance should be 12-18 inches.įor a shower-only bathroom, the faucet should be placed at least 48 inches above the floor. If you have a combination tub and shower, you must place the faucet somewhere that is accessible to both a bathtub bather as well as someone using the shower.įor a bath-only tub, the faucet should be 4 inches above the rim of the tub on the lower side. The wall-mounted bathroom faucet should be placed in a location that is easily accessible to the bather. Since a wall-mounted faucet is installed on the wall, the installation and replacement can be a bit complex. In modern bathrooms, these faucets got replaced by the new, easy-to-install faucets that are installed in the counter, tub, or sink. Wall-mounted bathroom faucets used to work best for any type of bathroom. So you must abide by the existing system and select your faucet placement according to that. If you are building your home from the ground, you have all the options to plan and place the plumbing according to your needs.īut if you are residing in a ready home, you can’t change the plumbing locations.

Tub spout height